輕觸開關和按鍵開關說明介紹篇

1. eneral specification  基本說明

1.1  Scope 范圍       This specification covers the requirements for single key switches which have no keytop

         (TACT SWITCHES:MECHANICAL CONTACT ). 此規范含蓋單推柄和無推柄的輕觸開關要求。

1.2  Operating Temperature Range  使用溫度范圍

         -20 to 70 ℃(normal humidity, normal press).正常濕度，標準壓力

1.3  Storage Temperature Rang    保存溫度范圍

         -20 to 80 ℃(normal humidity, normal press).

1.4  Test Conditions    測試條件

         Tests and measurements shall be made in the following standard clnditions unless otherwise specified:

         測試和計量按下列標準條件除非特殊說明

         Normal temperature (temperature 5 to 35℃)      標準溫度

         Normal humidity (relative humidity 45 to 85%)    正常濕氣

         Normal pressure (pressure860 to 1060 mbars )     標準壓力

         In case any question arises from the judgement made, tests shall be conducted in the following conditions：

         Temperature               (20±2℃)           溫度

         Relative humidity           (65±5%)           相對濕度

         Pressure                  (860 to 1060 mbars)   壓力

2. APPEARNCE, STYLE, AND DIMENSIONS 外形，類型和尺寸

    2.1  Appearance      外形

        There shall be no defects that affect the serviceability of the product  外形必須無缺陷才不影響產品適用性

    2.2  Style and Dimensions          類型和尺寸

        Shall conform to the assembly drawings.     符合裝配圖

3.  TYPE OF ACTUATION   動作類型

         Tactile      feedback     輕觸返回

4.  CONTACT ARRANGEMENT  1  poles  1  throws  接觸形式   1接點 1 回路

        (Details of contact arrangement are given in the assembly drawings).

         細接點形式在裝配圖中

5.   MAXOMUM  RATINGS    DC    12  V   50  mA  最大額定值