TACT  SWITCH  SPECIFICATION( 輕 觸 開 關 說 明 書 )

6.2Mechanical 機械特性.按鍵開關說明書

Item 項 目

Test Condition試驗條件

Requirements規 格

6.2.1.

Actuating Force

動作力

Placing the switch such that the direction of switch operation is vertical and then gradually increasing the load applied to the center of the stem, the maximum load required for the stem to come to a stop shall be measured.

開關的動作方向?yàn)榇怪狈胖瞄_關向推柄中心逐漸增加負荷直到推柄停止時所測量的最大負荷

____±30 gf

6.2.2.

Travel

行程

Placing the switch such that the direction of switch operation is vertical and then applying a static load twice the actuation force to the center of the stem, the travel distance for the stem to come to a stop shall be measured.

開關的動作方向?yàn)榇怪狈胖瞄_關，在已有行程的推柄中心向上減小壓力，推柄回到自由位置時所測到的力

0.3±0 .1mm

6.2.3.

Return Force

返回力

The sample switch is installed such that the direction of switch operation is vertical and, upon depression of the stem in its center the whole travel distance ,the force of the stem to return to its free position shall be measured.  

開關的動作方向垂直放置開關，在已有行程的推柄中心向上減小壓力，推柄回到自由位置時所測量到的力

_____±20 gf min

6.2.4.

Stop Strength

靜止強度

Placing the switch such that the direction of switch operation is vertical, a static load of 3  kgf shall be applied in the direction of stem operation for a period of  60  seconds.

開關的動作方向?yàn)榇怪狈胖瞄_關，在推柄動作方向施加 3 KG的靜負荷，60秒時間

There shall be no sign of damage mechanically and electrically

無機械的和電氣的損傷跡象