電話
搜索
關于寶圣about us
服務熱線:13790525968
TACT SWITCH SPECIFICATION( 輕 觸 開 關 說 明 書 ) |
||
6.PERFORMANCE 性能 6.1 Electrical 電氣 |
||
Item 項 目 |
Test Condition試驗條件 |
Requirements 要求 |
6.1.1. Contact Resistance 接觸電阻 |
Applying a static load twice the actuating force to the center of the stem, measurements shall be made with a 1 kHz small-currentcontact resistance meter. 用兩倍的動作力作靜負載施加于按鈕的中心,并用 1 千赫小電流接觸電阻儀測量 |
50 mΩmax. |
6.1.2. Insulation Resistance 絕緣電阻 |
Measurements shall be made following application of DC 100 V potintial across terminals and across terminals and frame for one minute. 在端子之間,端子與外殼之間施加DC100V,一分種 |
100 MΩmin |
6.1.3. Dielectric Witstanding voltage 電氣耐壓 |
AC250V (50Hz or 60Hz) shall be applied across terminals and across terminals and frame for one minute. 在端子與端子之間,端子與外殼之間施加 AC250V(50Hz or 60Hz) |
There shall be mo breakdown 沒有擊穿 |
6.1.4. Bounce 抖動 |
Lightly striking the center of the stem at a rate encountered in normal use ( 3 to 4 operations per sec ), Bounce shall be tested at “ON” and “OFF” 在正常使用中(以每秒3-4 次周期)輕輕地在手柄中心加力,在通與斷瞬間測試抖動。
|
5 m sec max . |
東莞市科銘塑膠電子廠是一家擁有雄厚技術實力和經濟實力的高新技術企業,集研發、生產、銷售為一體。主要生產產品:開關、插座、貼片開關、輕觸開關,DC電源插座,撥動開關,葉片開關,防水輕觸開關,小撥動開關,自鎖開關等。